About This

[Engineered for Engineering-Grade Filaments] E2 is a high-performance filament dryer built for demanding materials. With industry-leading 110°C heating capacity, it efficiently dries PA, PC, and reinforced filaments (CF/GF composites) in just 2–3 hours, ensuring smooth, precise prints
[3-in-1 Drying, Annealing & Dehumidifying] More than a simple dryer box, the E2 functions as a mini heat-treatment center. It combines drying, annealing, and a smart dehumidifying mode with silicone-sealed ports, dual-chamber insulation, a magnetic door with a gasket, and 5 packs of replaceable desiccants for long-lasting performance
[Rapid Heating & Superior Sealing] Powered by a 500W PTC heating unit, the E2 heats from 25°C to 50°C in just 20 minutes, reaching 70°C in 30 minutes. Dual-layer housing and silicone-sealed plugs enhance insulation and moisture resistance, protecting filaments from humidity and brittleness
[Multi-Layer Safety Protection] The advanced control system features 5 safety monitors: auto temperature regulation, overheat alarm (+10°C), heating failure alarm, fan error alert, and auto shut-off. Even at 110°C inside, the outer shell stays below 60°C for safe, worry-free operation
[Wide Compatibility for Multiple Spools] Supports 2×1KG, 2×2KG, or 1×3KG spools with diameters up to 250mm×153mm. Compatible with industrial-grade filaments like ASA, PC, PA, PA-CF, PA-GF, and consumer favorites like PLA, PETG, ABS, and TPU. Works with 1.75mm, 2.85mm, and 3.0mm filaments